1. When the processed original strip is within 1.5m from the conveyor, operation is not allowed.
2. Before turning on the power, turn off the electric chain saw switch to reduce accidental initiation.
3. Initiate the electric chain saw idling for 1 min before making lumber to check whether the operation is normal.
4. When launching or operating, hands and feet should not approach the rotating parts, especially the upper and lower parts of the chain
5. Check when the fuse is blown or the relay is tripped.
6. No line load operation is allowed, and no high-capacity fuse is allowed to be connected.
7. Operate the electric chain saw with both hands.
8. Stand firm during operation, and do not stand under the original strip or log, or operate on the original strip or log that may be tumbling.
9. When the shortcomings of the saw, you should pay special attention to the auxiliary personnel.
10. During operation, lubricate and cool the sawn timber organization.
11. When the original blade is sawn off, pay attention to the intention of the wood, and lift the electric chain saw after sawing off.
12. Turn off the switch of the electric chain saw first when transferring, and do not run during the transfer.